UZIN SC 970 Thermo Low-Shrink Rapid Cement
Special binding agent for efficiently producing low-shrinkage, dimensionally stable screeds for interior use
- Large-surface work without pre-determined breaking points, reduces costs/m² significantly
- Strength class CT-C30-F5 with mixing ratio 1:6 allows for the most efficient solutions
- Early heating and defined ready for covering; follow-up work is therefore possible after a short time
Applications
- bonded screeds
- screeds on separating layer
- screeds on insulation (floating screeds)
- heated screeds
- high wear in residential and industrial areas with all types of floor coverings
- as UZIN system component in rapid construction
Properties
- Deformation-free and low-tension
- Joint free large areas up to 200 m²
- Heating after 3 days
- Very easy to install
- Defined ready for covering, even with unfavourable climate conditions
- Waterproof
| Packaging | Paper bag |
|---|---|
| Shelf life | min. 6 months |
| Mixing ratio binding agent/sand | 1:6 parts by weight (binding agent:sand) |
| Amount of water required per 200 l mixture | 13 - 15 litres (according to sand moisture content) |
| Water/cement value | 0.5 - 0.6 |
| Colour | grey |
| Consumption | 2.6 kg per m² and per cm of thickness |
| Working temperature | +5 °C to 25 °C at floor level |
| Mixing time | 2 - 3 minutes |
| Working time | 90 - 120 minutes* |
| Set to traffic | after 16 hours* |
| Heat drying | 3 days after installation* |
| Ready for covering | After 10 – 14 days* |
| Article number |
|---|
| 73126 |
