UZIN NC 182 Low-Slump Smoothing Compound
Low-slump, fine and very fast setting cement smoothing compound for any thickness range
- Universal use as repair mortar
- Rapid setting even at low temperatures, time-saving
- No marks under visually sensitive coverings from coarse aggregate
Applications
- producing absorbent, high-strength, ready for covering installation
areas in a short amount of time - filling holes and cracks in most types of substrate particularly screeds or concrete floors
- edge or repair work before final smoothing and gluing
- patching of staircases and landings
- high durability in residential, commercial and industrial areas
- hot water underfloor heating
- chair castors according to DIN EN 12 529 from 1 mm compound thickness
- new or old cement, calcium sulphate screeds, stone-wood screeds, concrete, dense mineral-based substrates and similar
- chipboard P3/P5/P7 and OSB panels (each solidly fixed)
- old substrates with strongly bonded waterproof adhesive and smoothing compound residues
- also as "low-slump" surface compound on old adhesive residues and for filling down to "feather-edge"
- as system component in rapid construction
Properties
- Ready for covering after 60 min.
- Hydraulically setting
- From feather-edge to high thicknesses
- Ideal working properties
- Fine grain, eliminates smoothing edges
- For interior use
| Packaging | Paper bag |
|---|---|
| Packsize | 25 kg, 12.5 kg |
| Shelf life | min. 12 months |
| Required water quantity | 6.0 litres - 7.50 litres per 25 kg bag 3.0 litres - 3.75 litres per 12.5 kg bag |
| Partial quantity processing | 250 - 300 ml water for 1 kg powder |
| Colour | grey |
| Consumption | approx. 1.5 kg/m² per mm thickness |
| Minimum working temperature | 10 °C at ground level |
| Working time | approx. 15 minutes* |
| Cut edges | after approx. 15 minutes* |
| Set to traffic / can be skimmed over | after approx. 25 minutes* |
| Ready for covering | after approx. 60 minutes* |
| Article number |
|---|
| 37259 |
