UZIN NC 888 S Feather Coat
Rapid drying feather coat
- Extremly rapid drying, immediatly continue of working
- Really good surface finish, very little rework necessary
Applications
- new or old cement smoothing compounds
- existing substrates with well-bonded, waterproof residues of adhesive and smoothing compounds
- dense, mineral substrates
- large and small format tiling and natural stone
- dry screed materials, chipboards and OSB boards
- all standard construction screeds, concrete or other substrate types
- also for use as a "low-slump repair mortar" on old adhesive residues and for smoothing out to a feather-edge
- heavy wear in domestic and commercial locations
- warm water underfloor heating systems
- exposure to castor wheels in accordeance with DIN EN 12 529
- as a system component in high-speed construction
Properties
- from a "feather-edge" up to 4 mm thickness
- no primer requiered
- extremly rapid drying
- excellent surface finish
- fine aggregate
- bags are protected against damage
- plastic drum is available for mixing powder
- extended shelf life in orginal unopened drum
- low chromate content
| Packaging |
bag or two bags in plastic drum |
|---|---|
| Pack size |
4.5 kg or 2 x 4.5 kg |
| Shelf life |
min. 9 months |
| Required water quantity |
2.25 litres per 4.5 kg bag |
| Colour |
grey |
| Working temperature |
min. 10 °C on floor level |
| Working time |
approx. 20 minutes* |
| Set to traffic |
after approx. 10 minutes* |
| Ready to cover |
after approx. 15 minutes* |
| Article number |
|---|
| 56118 |
