UZIN NC 182 Low-Slump Smoothing Compound

Low-slump, fine and very fast setting cement smoothing compound for any thickness range

producing absorbent, high-strength, ready for covering installation
areas in a short amount of time
filling holes and cracks in most types of substrate particularly screeds or concrete floors
edge or repair work before final smoothing and gluing
patching of staircases and landings
high durability in residential, commercial and industrial areas
hot water underfloor heating
chair castors according to DIN EN 12 529 from 1 mm compound thickness
new or old cement, calcium sulphate screeds, stone-wood screeds, concrete, dense mineral-based substrates and similar
chipboard P3/P5/P7 and OSB panels (each solidly fixed)
old substrates with strongly bonded waterproof adhesive and smoothing compound residues
also as "low-slump" surface compound on old adhesive residues and for filling down to "feather-edge"
as system component in rapid construction

* At 20 °C and 65 % relative humidity.
Packaging	Paper bag
Packsize	25 kg, 12.5 kg
Shelf life	min. 12 months
Required water quantity	6.0 litres - 7.50 litres per 25 kg bag 3.0 litres - 3.75 litres per 12.5 kg bag
Partial quantity processing	250 - 300 ml water for 1 kg powder
Colour	grey
Consumption	approx. 1.5 kg/m² per mm thickness
Minimum working temperature	10 °C at ground level
Working time	approx. 15 minutes*
Cut edges	after approx. 15 minutes*
Set to traffic / can be skimmed over	after approx. 25 minutes*
Ready for covering	after approx. 60 minutes*